Contact Us
Products
Home Products

Stainless Steel

Industrial Grade Stainless Steel: Plates, Pipes & Profiles.               Get an Official Quotation within 2 Hours — Full MTR 

We supply a wide range of stainless steel product forms, including coils and strip, sheets and plates, pipes and tubes, bars and rods, and engineered profiles. Stock sizes and value-added processing support efficient industrial sourcing.

Filter by Form
  • SS 310 and 310S: High-Temperature Grades
  • 904L Stainless Steel: Sheet, Pipe, Bar and Coil [CO:wp/v2/products/name]
  • Plate & Sheet Supplier [CO:wp/v2/products/name]
  • Tube & Pipe
  • Bar & Rod
  • Coils & Coil Stock
  • Profiles
Filter by Grade Family
  • Austenitic Grades
  • Duplex Grades
  • Ferritic Grades
  • Martensitic Grades
  • Precipitation Hardening Grades
Filter by Rolling Condition
  • Cold Rolled
  • Hot Rolled

Reset Filters

Grade Families Chosen by Service Environment

Austenitic (300 Series)

A broad industrial choice when formability, weldability, and balanced corrosion resistance are required. Often specified for food-adjacent fabrication, moderate chemical exposure, and appearance-sensitive parts.

Ferritic & Martensitic (400 Series)

Selected when wear behavior, heat performance, magnetism, or specific mechanical characteristics drive the decision. Confirm the corrosion environment early, especially with chlorides, weather exposure, or chemical media.

Duplex

Used when higher strength and improved corrosion performance are required for more demanding conditions. If welding is involved, include procedure expectations and project requirements in the RFQ.

Precipitation-Hardening (PH)

Chosen when strength and dimensional stability are key. If heat treatment is required, specify target condition and hardness range to align supply and processing.

Common Grades (Indicative)

304 / 304L, 316 / 316L, 321, 310S, 409, 410, 420, 430, duplex options (on request), PH options (on request). Availability should be confirmed by product form, size range, and delivery condition during quoting.

Surface Finish Options for Stainless Products

Surface finish affects corrosion performance, cleanability, appearance, and downstream work. If the finish is visible or functional, define it in the RFQ to avoid mismatch.

  • Mill / Brushed / PolishedChoose based on appearance targets and cleaning requirements. For decorative or hygienic surfaces, share a reference (sample, photo, or finish callout) to align grain direction and reflectivity.
  • Pickled & Passivated / Protective FilmUsed when surface cleanliness and corrosion consistency matter. Protective film helps reduce handling marks during transport, storage, and fabrication—especially for cosmetic surfaces.

Click here for surface customization.

Processing Services for Stainless Orders

Value-added processing shortens time to production and reduces rework by delivering material closer to how your team uses it. Availability depends on product form, size, and order requirements.

  • Cut-to-Length & Cut-to-SizeOrder by required lengths or blanks to reduce internal cutting time and scrap. Include length tolerance, squareness expectation, and edge requirements. If cut faces are functional, note whether deburring or edge conditioning is needed.
  • Slitting & Coil PrepSpecify slit width, edge condition, and coil ID/OD if your workflow feeds stamping, roll-forming, or automated lines. Packing can be aligned to your uncoiling setup to reduce line stops.
  • Blanking & ShearingRequest blanks sized for your nesting plan to speed fabrication starts. If you have drawings, attach DXF/PDF and list quantity per size. If you provide a cutting list, include part marks to reduce receiving errors.
  • Export Packing & DocumentsExport-ready packing can be aligned to your receiving process. Documentation can be organized for customs clearance and inbound QC, especially when traceability and inspection steps are defined in advance.

Stainless Steel Manufacturing Solutions for Each Application

FAQs

Can you supply mixed sizes or multiple product forms in one shipment?
Yes. We specialize in consolidated shipments—combining plates, pipes, and profiles into one order. We provide complete MTR/ASTM documentation pre-verified for seamless EU customs clearance.
What's the fastest way to choose a grade if I’m not sure?
Share your service environment (indoor/outdoor, chemical contact, coastal exposure), temperature range, and whether appearance matters. We'll recommend a shortlist and confirm availability by product form and size range.
How should inox material be packed for export or long-distance transport?
Packing is selected based on surface sensitivity and destination handling method. Share unload method (forklift/crane), storage conditions, and whether protective film is required for the receiving process.
What surface finishes can be supplied?
Common surface finish options include 2B, BA, No.1, HL brushed, and 8K mirror finishes. Additional polished or decorative finishes may also be available depending on the stainless steel grade, product form, thickness, and project requirements. Please confirm your required finish when requesting a quotation.
What information should I include for cut-to-size requests?
Include target dimensions, tolerance expectations, edge requirement, and whether cut faces are functional. If parts are nested from sheet, attach a cutting list or drawing, and note quantity per size.

Need more details on stainless steel products? Feel free to contact Walmay anytime.

Walmay will help match the right stainless product form and specification for your application, confirm quantities and packing needs, and provide requested documents based on order requirements.

Have Questions? Need Support? Talk to an Expert