For wear-critical applications requiring heat-treatable hardness, see Walmay's 420 stainless steel plate (HRC 50–55 after quenching).Verified for Chemical Pressure Vessels & Industrial Mining Bases | Full MTR & SGS Inspection Support.
| Element | Content (%) |
|---|---|
| C | ≤0.08 |
| Cr | 18.0–20.0 |
| Ni | 8.0–11.0 |
| Mn | ≤2.0 |
| Si | ≤1.0 |
| P | ≤0.045 |
| S | ≤0.03 |
| N | ≤0.10 |
| Property | Value | Test Standard |
|---|---|---|
| Density | 7.93 g/cm³ | GB/T 7999 |
| Tensile Strength | ≥520MPa | GB/T 228.1 |
| Elongation | ≥35% | GB/T 228.1 |
| Salt Spray Resistance (NSS) | 720 hours, no rust | ASTM B117 |
Thickness: 2–20mm (tolerance ±0.1mm, hot-rolled precision)
Width: 1250 / 1500 / 1800 / 2000mm (standard)
Length: 2000 / 2440 / 6000mm (customizable)
Common Grades: 304, 316L, 430
Stainless Steel Plate Bending/Stamping Process
Stainless Steel Plates on Storage Rack
Palletized Stainless Steel Plates
Stainless Steel Plate Rolling Line
Precision Thickness Inspection of Stainless Steel Plate
Forklift Loading Stainless Steel Plates for Shipment
10mm 316L hot-rolled plate used for reactor shells in chemical plants used in chemical production workshops, across Asia, meeting local environmental safety standards.
16mm 304 hot-rolled plate used for mining machinery bases in machinery manufacturing workshops, in Southeast Asia, with a bearing capacity 40% higher than carbon steel.
20mm 430 hot-rolled plate used for large factory steel columns in architectural facades, in the Middle East, offering structural safety at a 30% lower cost than 304.
Walmay will help match the right stainless product form and specification for your application, confirm quantities and packing needs, and provide requested documents based on order requirements.
Loading form…
